Identification - Shop fox W1701W Owner's Manual

Model W1701W (For Machines Mfd. Since 1/16)
Become familiar with the names and locations of the controls and features shown below to better
understand the instructions in this manual.
B
C
A
M
L
A. Work Table
B. Fence (1 of 2)
C. Spindle Assembly
D. Cutterhead Guard
E. Miter Gauge
F.
Spindle Elevation Lock Knob
G. Fence Offset Knob
For Your Own Safety Read Instruction Manual Before Operating Shaper
a) Wear eye protection.
b) Always keep cutterhead guard in place and in proper operating condition.
c) Be sure keyed washer is directly under spindle nut and spindle nut is tight
d) Feed workpiece AGAINST rotation of cutter.
e) Keep fingers away from revolving cutter–use fixtures when necessary.
f) Do not use awkward hand positions.

Identification

D
H
E
F
J
K
H. Fence Offset Lock Lever
I.
Fence Lock Knob (1 of 2)
J. FOR/REV Switch
K. Adjustable Feet
L. Spindle Elevation Lever
M. ON/OFF Paddle Switch w/Key
-5-
G
I