Set Network - Avaya Cajun P550R Cli Reference Manual

Chapter 1

set network

Command Mode
Description
Syntax
Sample Output
1-20
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Enable or disable an ATM network.
* Note: You must disable a network each time you make a
change to the configuration. After you make
configuration changes, you must enable the network in
order for the changes to take effect.
set network {enable | disable}
Table 1-15. Parameters, Keywords, Arguments
Name
enable | disable
This example disables, then enables the ATM network.
ATM(configure)# set network disable
Network has been disabled
ATM(configure)# set network enable
Network has been enabled
Definition
Administratively enables or disables all ATM
protocols.