Set Atm-Link Mapping - Avaya Cajun P550R Cli Reference Manual

Chapter 1

set atm-link mapping

Command Mode
Description
Syntax
Sample Output
1-14
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
For the given ATM Link, this command maps an Ethernet priority to
a PVC.
* Note: All 8 Ethernet priorities should be mapped to a PVC.
Any traffic forwarded at an un-mapped Ethernet priority
will result in that traffic being dropped.
set atm-link <link-name> mapping {none | <pvcId>}
<priority>
Table 1-11. Arguments, Parameters, Keywords
Name
link-name
pvcId
priority
The following example maps Ethernet priority 6 to PVC 181 in the
TestLink ATM Link.
ATM(configure)# set atm-link TestLink mapping
0-2-300 6
PVC 2-0-300 has been set for priority 6 for
ATM Link TestLink
Definition
The name of the ATM Link whose Ethernet
priorities being mapped.
Use th
e show atm-link <vsportId> [<link-
to get the name of an ATM-Link whose
id>]
name is greater than 10 characters.
Virtual channel identifier. When a PVC is
created, the ATM Uplink module assigns the
vcID to the PVC. The format of the vcID is
<Physical Port>-<VPi>-<VCi> (ex: 1-0-300)
Use the
show pvc <link-name>
list of PVCs configured within the ATM Link
Priority for mapping. Range of values is 0 - 7.
to display the