Set Atm-Link Failover-Link - Avaya Cajun P550R Cli Reference Manual

set atm-link failover-link

Command Mode
Description
Syntax
Sample Output
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Sets the atm failover-link. The ATM Uplink module supports a
failover link. In the event one link fails, the traffic will be forwarded
by the failover link.
set atm-link <link-name> failover-link {none |
<link-name>}
* Note: none is used to clear the failover link setting for this
ATM Link.
* Note: This command applies only to Non-Routed VSP ATM
Links.
Table 1-10. Arguments, Parameters, Keywords
Name
link-name
The following example sets the failover-link for ATM Link MainLink
to ATM Link BackupLink. Should MainLink fail, BackupLink will
begin to forward the traffic.
ATM(configure)# set atm-link MainLink
failover-link BackupLink
Failover link BackupLink has been set for ATM
Link MainLink
The following example clears the failover-link for ATM Link
MainLink. Should MainLink fail, no backup is specified and traffic
will not flow.
ATM(configure)# set atm-link MainLink
failover-link none
Failover link none has been set for ATM Link
MainLink
Avaya ATM Uplink Module CLI Commands
Definition
The name of the ATM link whose failover link
you will specify.
Use th
e show atm-link <vsportId> [<link-
to get the name of an ATM-Link whose
id>]
name is greater than 10 characters.
1-13