Set Vsport Type - Avaya Cajun P550R Cli Reference Manual

set vsport type

Command Mode
Description
Syntax
Sample Output
Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Configuration
Sets the type of the vsport. This determines the encapsulation
format for Ethernet Frames carried across the ATM network.
Simple-Bridged is used when each VC carries a specific protocol
such as Ethernet or Token Ring.
LLC-Bridge is used when a PVC can carry multiple protocols. This is
provided for inter operability with other vendor's equipment.
Routed is used when an IP interface exists on each end of the link
and the only traffic carried by the link is routed traffic. This
effectively provides a point to point connection where all of the
layer 2 information (MAC header) is stripped from the frame before
being sent across the ATM network.
Refer the ATM Uplink 2.0 User's Guide for more details about these
parameters.
set vsport <vsportId> type {simple-bridge | routed | llc-bridge}
Table 1-93. Arguments, Parameters, Keywords
Name
vsportId
type
The following example sets VSP ID 4 to "simple-bridge".
ATM(Configure)# set vsport 4 type simple-
bridge
Type SIMPLE-BRIDGE has been set for VSPort 4
Avaya ATM Uplink Module CLI Commands
Definition
Virtual Switched Port Identifier. Possible values
range from 1 - 128.
Possible values are:
• simple-bridge
• routed
• llc-bridge
1-145