6.7.2.5 Activating The "Lock" Function; 6.7.2.6 Password Prompt - Sartorius PMA.Evolution EVO1Y1 Operating Instructions Manual

Level 1 Level 2 Level 3
SETUP
| - - - APP.PRG.
| - - - UNIT 2
| |- - - o GRAMS
| |- - -
| - - - DEC 2
|- - -
|- - - o POLYR.

6.7.2.5 Activating the "LOCK" Function

The "LOCK" function protects the scale from unauthorized use. When this function is active, the scale readout shows weight values
only when there is active communication between the scale and a PC. If communication is interrupted, the readout goes blank
and the display shows a padlock symbol. Activation of the LOCK function is configured under "EXTRAS."
Access the Setup menu (see Chapter 6.7.2.1, page 27).
t
Level 1 Level 2 Level 3
DEVICE
| - - - EXTRAS
| - - - LOCK
|- - - o ON
|- - -

6.7.2.6 Password Prompt

In addition to the "LOCK" function, you can also configure password protection for additional security.
With this feature, the "LOCK" function can only be deactivated "OFF" by entering the password you configure.
Entering the Password
When the password prompt appears, the numbers 1 2 3 4 5 6 appear on the display.
You can switch to the numbers 7 8 9 0 and back again via the O / P keys.
Enter the password by entering the individual numbers on the display.
t
When you enter the correct password, the "LOCK" function will be disabled.
y
Level 4
Press !
t
Press O / P, select APP.PRG.
t
Press !, press O / P, select UNIT 2
t
Press !, press O / P, select setting (e.g., GRAMS)
t
Press !, "o" appears indicating the desired setting is applied
PT.P.LB
t
Press §
t
Press O / P, select DEC 2
ALL t
Press !, press O / P, select setting
t
Press !, "o" appears indicating the desired setting is applied
t
Press § several times to exit the menu
t
Level 4
Press O / P, select DEVICE, press !
t
Press O / P, select EXTRAS, press !
t
Press O / P, select LOCK, press !
t
Press O / P, select ON
t
Press !, "o" appears
OFF
t
The "LOCK" function
y
Press § several times to exit the menu
t
is activated
EVO1Y1 Operating Instructions
Operation
29