Fn 29: Plc - Transfer Values To The Plc; Fn 37: Export - HEIDENHAIN TNC 620 User Manual

9
Programming: Q Parameters
9.8 Additional functions
FN 29: PLC – Transfer values to the PLC
This function may only be used with the permission
of your machine tool builder.
The FN 29: PLC function transfers up to eight numerical values or
Q parameters to the PLC.

FN 37: EXPORT

This function may only be used with the permission
of your machine tool builder.
You need the FN 37: EXPORT function if you want to create your
own cycles and integrate them in the TNC.
332
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015