HEIDENHAIN TNC 620 User Manual page 595

General network settings
Press the CONFIGURE NETWORK soft key to enter the general
network settings. The Computer name tab is active:
Setting Meaning
Primary
Name of the Ethernet interface to be
interface
integrated in your company network. Only
active if a second, optional Ethernet interface
is available on the control hardware
Computer
Name displayed for the TNC in your company
name
network
Host file
Only required for special
Name of a file in which the assignments of IP
addresses to computer names is defined
Select the Interfaces tab to enter the interface settings:
Setting Meaning
Interface list
List of the active Ethernet interfaces. Select
one of the listed interfaces (via mouse or
arrow keys)
Activate button: Activate the selected
interface (an X appears in the Active
column)
Deactivate button: Deactivate the
selected interface (- in the Active column)
Configuration button: Open the
configuration menu
Allow IP
This function must be kept
forwarding
Only activate this function if external access
via the second, optional Ethernet interface
of the TNC is necessary for diagnostic
purposes. Only do so after instruction by our
Service Department
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
applications:
deactivated.
Ethernet interface 17.11
17
595