HEIDENHAIN TNC 620 User Manual page 19

TNC model, software and features
New functions 81760x-03
Manual probe functions create a completely new line in the
preset table, see "Writing measured values from the touch
probe cycles to the preset table", page 512
Manual probe functions can write in a password-protected line,
see "Writing measured values from the touch probe cycles to
the preset table", page 512
The column AFC-LOAD was added to the tool table. In this
column you can set a tool-dependent standard reference
power for the adaptive feed control AFC, which you establish
once with a teach-in cut, see "Enter tool data into the table",
page 176
The column KINEMATIC has been added to the tool table, see
"Enter tool data into the table", page 176
When importing tool data, the CSV file may contain additional
table columns not recognized by the control system. On import,
a message appears about the unrecognized columns with a
note stating these will not be imported, see "Import and export
tool data", page 205
New function FUNCTION S-PULSE for programming pulsing
shaft speeds, see "Pulsing spindle speed FUNCTION S-PULSE",
page 419
It is possible to search quickly for a file in file management by
entering the first letter, see "Selecting drives, directories and
files", page 123
With active structuring, the structuring block can be edited
in the structure window, see "Definition and applications",
page 150
The FN18 functions have been expanded, see "FN 18:
SYSREAD: Reading system data", page 323
The control differentiates between interrupted or stopped NC
programs. In the interrupted status, the control offers more
intervention options, see "Interrupt machining", page 563
In the Tilt working plane function, you can choose an animated
aid, see "Overview", page 426
The software option number 42 DXF Converter now also
produces CR circles, see "Basic settings", page 264
19
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015