HEIDENHAIN TNC 620 User Manual page 433

The PLANE function: Tilting the working plane (software option 8) 12.2
Input parameters
Rot. angle Main coordinate plane?: Rotary angle
EULPR around the Z axis. Please note:
Input range: -180.0000° to 180.0000°
The 0° axis is the X axis
Tilting angle tool axis?: Tilting angle EULNUT of
the coordinate system around the X axis shifted by
the precession angle. Please note:
Input range: 0° to 180.0000°
The 0° axis is the Z axis
ROT angle of tilted plane?: Rotation EULROT
of the tilted coordinate system around the tilted
Z axis (corresponds to a rotation with Cycle 10
ROTATION). Use the rotation angle to simply
define the direction of the X axis on the tilted
working plane. Please note:
Input range: 0° to 360.0000°
The 0° axis is the X axis
Continue with the positioning properties
Further Information:
behavior of the PLANE function, page 441
NC block
5 PLANE EULER EULPR45 EULNU20 EULROT22 .....
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Specifying the positioning
12
433