HEIDENHAIN TNC 620 User Manual page 479

14.2 Moving the machine axes
Note
Refer to your machine manual.
Moving with the axis direction keys can vary
depending on the machine.
Moving the axis with the axis direction keys
Select the MANUAL OPERATION mode
Press the axis direction key and hold it down as
long as you wish the axis to move; or
To move the axis continuously: Press and hold the
axis direction button and press the NC START key
To stop: Press the NC Stop key
You can move several axes at a time with these two methods. The
control then shows the feed rate. You can change the feed rate at
which the axes are moved with the F soft key.
Further Information: Spindle speed S, feed rate F and
miscellaneous function M, page 491
If a moving task is active on the machine, the control displays the
control in operation symbol.
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015
Moving the machine axes 14.2
14
479