HEIDENHAIN TNC 620 User Manual page 592

17
MOD Functions
17.10 Setting up data interfaces
Setting the operating mode of the external device
(fileSystem)
The functions "Transfer all files," "Transfer selected
file," and "Transfer directory" are not available in the
FE2 and FEX modes.
Icon External device
PC with HEIDENHAIN TNCremo data
transfer software
HEIDENHAIN floppy disk units
Non-HEIDENHAIN devices such as
printers, scanners, punchers, PC
without TNCremo
Data transfer software
For transmitting files to and from the TNC, we recommend using
the HEIDENHAIN TNCremo data transmission software. With
TNCremo, data transmission is possible with all HEIDENHAIN
controls via the serial interface or the Ethernet interface.
You can download the current version of TNCremo
free of charge from the HEIDENHAIN Filebase
(www.heidenhain.de, <Documentation and
Information>, <Software>, <Download area>, <PC
Software>, <TNCremo>).
System requirements for TNCremo:
PC with 486 processor or higher
Windows XP , Windows Vista, Windows 7 , Windows 8 operating
system
16 MB RAM
5 MB free memory space on your hard disk
An available serial interface or connection to the TCP/IP network
Installation under Windows
Start the SETUP .EXE installation program with the file manager
(Explorer)
Follow the setup program instructions
Starting TNCremo under Windows
Click on <Start>, <Programs>, <HEIDENHAIN Applications>,
<TNCremo>
When you start TNCremo for the first time, TNCremo automatically
tries to set up a connection with the TNC.
592
Operating
mode
LSV2
FE1
FEX
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2015