Registering The Initial Display's Default Functions - Ricoh Savin en5100WD Operating Instructions Manual

Registering the Initial Display's Default
Functions
This section describes how to program defaults for the initial display when modes are cleared or reset,
or immediately after the operation switch is turned on.
The default settings you can program are Paper Tray, Original Type, Density, Special Original, Original
Orientation, Edit / Stamp, Combine, Reduce / Enlarge, Finishing, Adjust Print Position, Copy Output
Location, Fold Type, paper cut method, and the number of copies.
1. Specify scan settings and any other settings you require on the initial display.
2. Press the [Program] key.
3. Press [Program as Defaults].

Registering the Initial Display's Default Functions

BKY047S
97