(5.9 inches) DZV179 45 cm (17.7 inches) 75 cm DZV178 (29.5 inches) Power Source 220 - 240 V, 50/60 Hz, 6.6 A ECP004 DZV180 M 2700 M 2701 M 2701 DZV127 DZV103 DZV104 M 2700 M 2701 DZV128 DZV129 DZV105...
Page 5
DZV123 DZV124 DZV125 DZV126 When using a wireless (Wi-Fi) connection, connect the wireless LAN option and proceed to Step 28. DZV407 When using a wired (Ethernet) connection, connect the Ethernet cable and proceed to Step 28. DZV132 When using a USB connection, do not connect the cable and proceed to Step 28.
Page 6
ECP003 Calibrating... Warming up... DZV174 DZV172 DZV173 Set Date/Time Function Priority System Auto Reset Timer DZV136 DZV138 Set Date/Time Set Date Set Date Month/Day/Year Set Time Day/Month/Year Year/Month/Day DZV139 DZV140 Set Date Set Date/Time Set Date Year/Month/Day Set Time 2018 / 07 DZV142 DZV144...
Page 7
Install the software to use the machine. Go to page 6 “2. Installing the Software”.
2. Installing the Software Check how the computer is connected Specify how to connect to your computer according to the communication environment of your system. The wireless LAN (Wi-Fi) connection is available when you attach a wireless LAN option to the USB port on the left side of the machine. Which method do you want to use (wireless or wired)? Wireless Wired...
Connecting the Machine via Wireless (Wi-Fi) Windows To use the machine with a Wireless (Wi-Fi) connection, we recommend setting up the Wireless (Wi-Fi) settings of the machine first, and then installing the printer driver. DZV169 Press the [ ] or [ ] key to select [Network Settings], and Easy Setup Using the Wi-Fi Setup Wizard then press the [OK] key.
13. Press the [Escape] key. Easy Setup Using the WPS Button 14. Press the [ ] or [ ] key to select [WiFi Setup Wizard], and then press the [OK] key. ● Make sure the Ethernet cable is not connected to the Print List/Report machine.
Page 11
Connection has failed: 11. Press the [ ] or [ ] key to select [Connect Method], and then press the [OK] key. Network Settings Connection to AP has Failed IPv6 Configuration Connect Method EXIT DSG095 • Press the selection key under [EXIT] to return to the screen DZV155 displayed in Step 15.
Page 12
Check [WiFi Enable] is selected, and then press the [OK] Easy Setup Using a PIN Code key. WiFi WiFi Enable ● Make sure the Ethernet cable is not connected to the machine. ● In Steps 19 to 21, configure each setting within two DZV153 minutes.
18. Enter the machine’s PIN code (8 digits) on the router Easy Setup Using the CD-ROM (access point)’s web page.(The web page accessed in Step Using the CD-ROM supplied with this machine, you can install the driver from your computer and configure the Wireless (Wi-Fi) settings for this machine.
Page 14
Select [Wireless Connection] and click [Next]. Select [Manually configure the printer network] when installing this machine. Connect your computer and this machine by using the USB cable. Select [Automatically configure the printer network] when configuring the Wireless (Wi-Fi) settings for this machine is completed.
Connecting the Machine (USB/Network) Windows DZV170 DZV171 Click [Finish] in the [Setup Complete] dialog box. If the installer prompt you to restart Windows, reboot your ● The following items are necessary to set up a wired computer. connection. ● USB interface cable or Ethernet interface cable ●...
3. Scan settings ■ For those using the scanner features for the first time For information about specifying the initial scan settings, see “What You Can Do with the Scanner Function”, User Guide in the provided CD- ROM or our website. Control Panel Sheet DZV102 1 [Sort] key...
Page 17
Trademark Wi-Fi, Wi-Fi Protected Setup, WPA, Wi-Fi Protected Access, WPA2, and Wi-Fi Protected Access 2 are registered trademarks of Wi-Fi Alliance. Windows is a registered trademark of Microsoft Corporation in the United ® States and/or other countries/regions. Other product names used herein are for identification purposes only and might be trademarks of their respective companies.
Need help?
Do you have a question about the M 2700 and is the answer not in the manual?
Questions and answers
Where is the scan to pc button
The Ricoh M 2700 has a [Scanner] key on the control panel, which is used for scanning functions.
This answer is automatically generated