Adjusting Thread Tension - Siruba HSP-68100 Instructions Manual

4
Weak
4
Weak
4
Strong
Strong

ADJUSTING THREAD TENSION

In straight seams, the needle thread and the bobbin
thread should lock together in the center of the two
layers of fabric.
If you look at the top and bottom of the stitch, you will
notice that there are no gaps; each stitch is smooth
and even.
When adjusting needle thread tension, the higher the
number, the tighter the needle thread.
Here are some reasons you may change the thread
tension dial:
1. The fabric is stiff or heavy.
2. You are sewing more than two layers of fabric.
3. The stitch you are using needs the threads not to
lock together in the center of the fabric.
Tension is too tight.
The needle thread shows through on the topside of the
fabric and it will feel bumpy.
Turn the dial to a lower number to loosen the needle
thread tension.
Tension is too loose.
The needle thread shows through on the underside of
the fabric and it will feel bumpy.
Turn the dial to a higher number to tighten the needle
thread tension.
- 15 -