Before Sewing (Power Supply And Sewing Lamp) - Siruba HSM-2722 Instruction

BEFORE SEWING
Power supply / Power supply plug
Warning:
Please always unplug the power plug before you change the bulb or
perform maintenance work to the machine so that you prevent deadly
peril and electric shock.
Power supply
Plug receptacle
machine plug
Speed Controller
Sewing lamp
1. Fit plug into the machine.
2. Insert plug into the main socket.
3. Sewing speed can be varied by the
foot control.
If the supply cord that fixed with foot
controller is damaged, it must be
replaced by the manufacturer or its
service agent or a similar qualified
person in order to avoid a hazard.
Use only ZHEJIANG FOUNDER model
KD-2902 foot controller with sewing
machine.
Bulb replacement:
1. Open face cover in direction of arrow.
2. Remove bulb by unscrewing it
anti-clockwise.
3. Install a new bulb by screwing it in
clockwise.
4. Use a screw type bulb with 15W.
(max)
5. Make sure the bulb is cold before
removing it.
- 6 -