Straight Stitches; Zig-Zag Stitch; Free Arm Sewing; Seam Finishing - Siruba HSP-68100 Instructions Manual

Table of Contents

Pattern selector position.

Cutting thread slot

STRAIGHT STITCHES

1. This stitching is one of most commonly used

pattern.

2. The zigzag presser foot also can use in the

straight stitches and the zigzag stitches

3. To sewing thinner cloth may use smaller stitch

length.

Zig-zag stitch is a useful pattern. Setting the stitch

length to (0.3) the satin stitch (pattern 01) can be

used for embroidery, applique, etc. When you use

this kind of stitch to sew a thin fabric, please loosen

upper tension a little and place a piece of paper

under the fabric or lining cloth to avoid wrinkling.

(Use Zig-zag pattern, please turn the upper tension

dial in between 1-3).

1. Free arm sewing is useful for sewing sleeves,

trousers etc.

2. Your sewing machine can be used as a flat bed

machine but easily convert to free arm machine by

removing the extension table.

When sewing to edge of cloth, push the reverse

button and sew in reverse for approx 2 centimeters.

Then raise needle to highest position, raise presser

foot and take the fabric to rear of machine. The

threads can be cut with thread cutter location in rear

face plate. (Arrow place)

- 27 -

Table of Contents