Table of Contents
Advertisement
Remake：
Buttonhole patterns are one time stitches.
Bartacks
Button slot
(Diagram 1)
(Diagram 2)
(Diagram 3)
Buttonhole
locations
(Marks)
(Diagram 4)
Button adjuster
(Diagram 5)
BUTTONHOLE SEWING
1. Exchange to buttonhole presser foot.
2. Pulls out upper and bobbin threads approx. 10cm,
and then lay aside under presser foot. (Diagram 1)
3. Set needle width dial at between 4-5. (Diagram 2)
4. Set stitch length dial at 0.3-0.5. (Diagram 3)
5. Make buttonhole locations on fabric. (Diagram 4)
6. Place fabric under presser foot.
As (Diagram 5) arrow place, put in the button.
7. Lower down presser foot.
8. Press the Buttonhole lever.
9. Set BH stitch pattern (10、11、12、13、14、15、16、
17), choose the pattern and raise the needle to
peak.
10. Start sewing slowly until it reaches bartacks of the
start line and then stop sewing.
11. Raise presser foot and take out fabric.
- 31 -
Advertisement
Table of Contents
