Automatic Needle Threader - Siruba HSP-68100 Instructions Manual

A
B

AUTOMATIC NEEDLE THREADER

NOTE: * Needle must be in its highest position and
remove presser foot when using needle
threader.
* Needle threader cannot be used with a twin
needle.
1. Raise the needle to its highest position.
Lower the needle threader lever as far as it will go.
2. Hook A will automatically insert itself into the
needle eye. Bring the thread around Guide B and
under Hook A.
3. Release the lever and let the needle threader return
to its original position. Pull the thread loop to the
back to finish bringing the thread through the
needle eye.
Note: * Do not turn the hand wheel when using the
needle threader.
* Do not touch threader lever whilst sewing as
needle threader will be damaged. We advise
you to switch off power when using the
threader unit.
- 13 -