Maintaining Disk Drives; Disk Drive Compatibility With Cms Loads; Prerequisites - Avaya Sun Fire V880 Installation & Maintenance

Maintaining disk drives

This section includes the following topics:

Disk drive compatibility with CMS loads

●

Prerequisites

●
Disk drive configurations
●
Required references
●
Replacing disk drives
●
Adding disk drives (optional)
●
Disk drive compatibility with CMS loads
When a new or replacement disk drive is installed in an older system, the CMS load may
not be compatible with the disk drive if the CMS configuration files have not been updated.
Two configuration files (/olds/disk.conf and /olds/olds-funcs) must be edited or
replaced with the correct information. Contact the Avaya technical support organization for
assistance.
Prerequisites
If possible, do a CMSADM backup before you add or replace a disk drive. See your CMS
software installation, maintenance, and troubleshooting document for this procedure.
Before you attempt to replace defective data (nonboot) disks, try to print the current setup
for all ACDs. This information must be readministered after you install replacement disks.
on page 99
on page 100
on page 101
on page 101
on page 119
on page 99
Maintaining disk drives
Issue 2.0 June 2004 99