Setting Up Replacement Disk Drives - Avaya Sun Fire V880 Installation & Maintenance

Maintenance

Setting up replacement disk drives

After you replace defective disk drives, do one of the following, depending on drives
replaced:
Drives replaced
One boot disk
Both boot disks
Data disks
112 Avaya CMS Sun Fire V880 Computer Hardware Installation, Maintenance, and Troubleshooting
Partition the new boot disk drive (see
drives on page 113). Continue with the procedures in "Recovering a
mirrored system after disk failure" in the maintenance chapter of the
CMS software installation, maintenance, and troubleshooting
document for your CMS release.
Continue with the procedures in "Performing a CMSADM restore of a
mirrored or non-mirrored system" in the maintenance chapter of the
CMS software installation, maintenance, and troubleshooting
document for your CMS release.
Partition and administer the drive so that it works with the existing
disk drives (see Partitioning replacement disk drives
Continue with the procedures in "Recovering a mirrored system after
disk failure" in the maintenance chapter of the CMS software
installation, maintenance, and troubleshooting document for your
CMS release.
Procedure
Partitioning replacement disk
on page 113).