Avaya Sun Fire V880 Installation & Maintenance page 171

3. Enter:
probe-scsi-all
The program displays a message that is similar to the following:
/pci@8,600000/SUNW,qlc@2
LiD HA LUN --- Port WWN ---
0 0 0 21000004cf72f08f
1 1 0 21000004cf721553
2 2 0 21000004cf7213ea
6 6 0 508002000016b5b1
3 3 0 21000004cf72114b
4 4 0 21000004cf7211ae
5 5 0 21000004cf7214a3
/pci@8,700000/scsi@1
Target 5
Unit 0 Removeable Tape
Target 6
Unit 0 Removeable Read Only device
/pci@8,700000/pci@5/SUNW,1sptwo@4
Note:
The actual devices that are listed depends on the devices that are installed
Note:
in the system. This example shows six disk drives, the disk backplane, the
tape drive (target 5), and the DVD-ROM drive (target 6).
4. Fix any obvious errors, such as disconnected cables or external drives without power.
5. When you finish testing, enter the following commands:
!
CAUTION:
If you fail to enter these commands, any reboots that you do in the future will
CAUTION:
stop at the boot prompt instead of proceeding through the normal boot-up
process.
setenv auto-boot? true
boot -r
The system reboots.
-----Disk description -----
SEAGATE ST373405FSUN3660438
SEAGATE ST373405FSUN3660438
SEAGATE ST373405FSUN3660438
SUNW SUNWGS INT FCBPL9224
SEAGATE ST373405FSUN3660438
SEAGATE ST373405FSUN3660438
SEAGATE ST373405FSUN3660438
HP C5683A C005
TOSHIBA DVD-ROM SD-M14011009
Tools
Issue 2.0 June 2004 171