5. Turn the key switch to the Forced Off position. See the following figure.
!
DANGER:
Be sure to turn the key switch to the Forced Off position before handling any
DANGER:
internal components. Otherwise, it is possible for a user to restart the
system remotely while you are working inside it. The Forced Off position is
the only key switch position that prevents an RSC user from restarting the
system.
6. Open the left door.
7. Attach one end of an ESD antistatic wrist strap to the system chassis sheet metal and
attach the other end to your wrist. See
information.
8. Identify which card you want to remove.
9. Disconnect the HSI/P quad cable connected to the card.
Using an ESD wrist strap
Maintaining PCI cards
on page 58 for more
Issue 2.0 June 2004
81