Pci Card Configuration - Avaya Sun Fire V880 Installation & Maintenance

PCI card configuration

The cards are installed in the slots shown in the following table. The minimum configuration
has the graphics card in slot 7 and either a SunSwift card in slot 0 or a Dual FastEthernet
and Dual SCSI card in Slot 8.
Slot
Number Type
8 33/66MHz, 3.3V
7 33/66MHz, 3.3V
6 33MHz, 5V
5 33MHz, 5V
4 33MHz, 5V
3 33MHz, 5V
2 33MHz, 5V
1 33MHz, 5V
0 33MHz, 5V
1. Hot-plug operation for a PCI card requires that the card have detach-safe drivers. If the card does not have
detach-safe drivers, the system must be shut down to add, remove, or replace the card.
2. The computer supports a maximum of two HSI/P cards for CMS. The first card must be in Slot 3. CMS R12 and later
do not support HSI/P cards and X.25.
3. The computer supports a maximum of two FastEthernet cards for CMS. The first card must be in Slot 1.
4. The older Dual FastEthernet and Dual SCSI cards do not support hot-plug operation.
Name
Reserved for future use
Graphics (required)
Empty
Empty
2
Second HSI/P (optional)
2
First HSI/P (optional)
3
Second FastEthernet
3
First FastEthernet (optional)
SunSwift (required), or
Dual FastEthernet and Dual SCSI (required)
Card
(optional)
Maintaining PCI cards
Supports Device
1
hot-plug? name
N/A N/A
No N/A
N/A N/A
N/A N/A
No N/A
No N/A
Yes ce1
Yes ce0
Yes eri0
4
Yes eri0
Issue 2.0 June 2004 61