Avaya Sun Fire V880 Installation & Maintenance page 117

5. Partition the disk by completing the following Steps a through e for all partitions
specified in the Disk partition values
a. At the partition> prompt, enter the partition number from the table. For example:
partition> 0
The system prompts for the partition ID tag.
b. Enter the partition ID tag from the table. For partition 0, press Enter to accept the
default of unassigned.
Enter partition id tag [unassigned]:
The system prompts for permission flags.
c. Enter the permission flag, usually wm or wu.
The system prompts for the starting cylinder.
d. Enter the number of the starting cylinder from the table. For example:
Enter new starting cyl [0]: 0
The system prompts for the partition size.
e. Enter the partition size from the table. For example:
Enter partition size [0b, 0c, 0mb]: 2gb
The partition> prompt is displayed.
6. When you have sized all of the partitions, enter:
print
7. Compare the partition table that is now displayed to the
page 113. If there are any discrepancies, correct them by repeating the disk
partitioning.
8. When you determine that the disk partitioning is correct, enter:
label
The system prompts you to continue.
! !
Important: Important:
Do not forget to label the disk drive.
Important:
9. Enter: y
The partition> prompt is displayed.
on page 113.
Disk partition values
Maintaining disk drives
on
Issue 2.0 June 2004 117