Avaya Sun Fire V880 Installation & Maintenance page 89

5. Select the swsetup option.
6. Select the ACD that you want to set up.
7. Accept the existing defaults for the following:
Switch name
●
Switch model (release)
●
Vectoring
●
Expert agent
●
Central office disconnect supervision
●
Local port
●
Remote port
●
8. Select "X.25" and a specific link number when prompted for the link information.
9. Repeat Steps 4 through 8 for each ACD that will use the HSI card.
10. Enter:
cmssvc
The CMS Services menu is displayed.
11. Select the run_cms option.
12. Turn on CMS.
13. Test and troubleshoot each switch connection using the procedures in Avaya Call
Management System Switch Connections, Administration, and Troubleshooting.
14. Perform a CMSADM file system backup to back up the updated system configuration.
See your CMS software installation, maintenance, and troubleshooting document for
details.
Maintaining PCI cards
Issue 2.0 June 2004 89