Table of Contents
Advertisement
Supervisor level
Mops temp. Standard plus
The pre-set temperature can be
altered in the Mops plus and Mops
plus + rtu programmes.
- 40 °C (factory default)
- 60 °C
- 70 °C
- 90 °C
Mops Ch.-th. disin.
The pre-set disinfection process can
be altered in the Mops chemo-thermal
disinfection programme.
- 40 °C/20 min
- 60 °C/20 min (factory default)
- 70 °C/10 min
Mops Th.-disin.
The pre-set disinfection process can
be altered in the Mops thermal disin-
fection programme.
- 75 °C/10 min
- 85 °C/15 min (factory default)
76
Microfibre mops
The Microfibre Extra can be selected
for the mop programmes.
- Inactive, not visible
- Can be selected, visible (factory de-
fault)
- Active, not visible
Mops, pre-treat rpm
The pre-set spin speed can be altered
in Finish/Pre-treat mop programmes.
- 300 rpm
- 400 rpm
- 600 rpm
- 800 rpm (factory default)
Cloths temp Standard plus
The pre-set temperature can be
altered in the Cloths plus and Cloths
plus + rtu programmes.
- 40 °C (factory default)
- 60 °C
- 70 °C
- 90 °C
Advertisement
Table of Contents
