Percent Mode (%) - AND EK-610j Instruction Manual

www.balances.com in an Authorized A&D Dealer
9. The balance re-calculates the unit weight while the ACAI mark is blinking. Do not
touch the balance or samples on the pan until the ACAI mark turns off.
10. Counting accuracy is improved when the ACAI mark turns off. Each time the above
operation is performed, a more accurate unit weight will be obtained. There is no
definite upper limit of ACAI range for the number of samples exceeding 100. Try to
add the similar number of samples as displayed.

5-7. Percent mode (%)

Displays the weighing value in percentage compared to the reference (100%) weight.
Selecting the percent mode
1. Press the MODE key to select %. (%:percent)
Storing the reference (100%) weight
2. Press the SAMPLE key to enter the reference
weight storing mode.
3. Press the TARE key to display 100 0%.
4. Place the sample to be set as the reference
weight on the pan.
5. Press the ENTER key to store the reference
weight. Remove the sample.
Reading the percentage
6. Place the object to be compared to the reference
weight on the pan. The displayed percentage is
based on 100% of the reference weight.
Visit www.scaleman.com to order A&D Weighing balances at discount prices
ZERO
9
0. 0
%
100 -
%
100 0
%
Weighing pan
Sample
corresponding
to the 100%
weight
To store
100. 0
%
Object to be
compared
75. 8
%