Options; Comparator Relay Output And Buzzer - AND EK-610j Instruction Manual

www.balances.com in an Authorized A&D Dealer
The following options are available for the EK- j series:
OP-04 Comparator relay output and buzzer
OP-07 Underhook assembly for EK-6100 j
OP-09 Rechargeable battery pack (Ni-MH)
OP-12 Carrying case
9-1. OP-04 Comparator relay output and buzzer
Allows output of the HI, OK or LO signal results to an external device as a solid state
relay output.
It is possible to sound a buzzer according to the comparison result. See the function
"bep" to set which result will make a buzzer sound.
The comparator function on/off, the comparison mode and comparator
buzzer output can be selected using the function settings. See the
settings "
OP-04 cannot be used together with OP-09.
Output circuit
Solid state relay
Maximum rating
The maximum rating of the relay output is as follows.
Maximum voltage:
Maximum current:
Maximum ON resistance: 8Ω
Visit www.scaleman.com to order A&D Weighing balances at discount prices

9. OPTIONS

cp bep
" and " ".
Output connector
MSTB 2.5/4-GF-5.08
Inside of the EK-j
50V DC
100mA DC
Mating connector
MSTB 2.5/4-STF-5.08
(Attached to the OP-04)
20
1 2 3 4
7 mm