7: Connecting An Rks-S Remote Key Switch - Notifier NFS2-3030/E Installation Manual

Fire/Security Applications
4.5.7 Connecting an RKS-S Remote Key Switch
The RKS-S Remote Key Switch arms and disarms the system. It can be mounted in a UL listed
single-gang electrical box. Both the monitor module and RKS-S must be mounted within the
protected area. Figure 4.7 and Figure 4.8, respectively, depict the connection of the FMM-101 or
FMM-1 module to the RKS-S.
RKS-S (front)
NFS2-3030/E Installation Manual — P/N 52544:N1 07/18/2014
R-47K
End-of-Line
RKS-S (rear)
Resistor
WARNING:
!
XP TRANSPONDER CIRCUITS (XPP-1, XPM-8, XPC-8, XPR-8,
XPM-8L) ARE NOT SUITABLE FOR SECURITY APPLICATIONS.
Figure 4.7 Connecting the FMM-101 Module to the RKS-S
RKS-S rear
R-47K
End-of-Line
Resistor
Figure 4.8 Connecting the FMM-1 Module to the RKS-S
yellow (–)
purple (+)
red (+)
SLC
black (–)
SLC Out
FMM-1
*If the SLC device does
not match the one in this
figure, refer to the SLC
manual appendix, which
contains wiring conversion
charts for type V and type
H modules.
Applications
FMM-101
SLC
In
49