Table of Contents
Advertisement
CONTROL DESCRIPTION
Power on/off button
1
When you press the on/off button, the machine is
switched on and the display shows the Eco 50 program,
the dishwasher is off when the LEDs on the display are off�
Door handle
2
Use the door handle to open/close the door of your
dishwasher�
Start/Standby button
3
When the start/standby button is pressed, the program
selected with the program button will start and the
progress indicator display will show the washing image
� The progress indicator display will show the
15
washing phases�
15
FlexZone button
4
The FlexZone function allows dishes to be washed in the
upper basket only, lower basket only or both upper and
lower baskets to cater for every load size�
If you do not have a full load of dishes in your machine
you can also activate the FlexZone function for some
programs�
If you have dishes in both baskets, press
the FlexZone button and select the position in which both
lamps are highlighted�
If you have dishes only in the upper basket, press the
FlexZone button and select the position in which the
upper image is illuminated� Washing will occur only in the
upper basket of your machine�
If you have dishes only in the lower basket, press the
½ key and select the position in which the lower image is
illuminated� Washing will occur only in the lower basket
of your machine� When using this feature, make sure that
there are no dishes in the upper basket�
Program button
5
Select the appropriate washing program from the display
using the program button�
10
Tablet detergent button
6
Press the tablet detergent button whenever using tablets�
If this button is active for the program you have selected,
indicator
will be illuminated on the display�
12
Dry Plus button
7
Using this button, you may add extra drying to the
program you have selected�
When you select the extra drying function, indicator
is illuminated on the display� Using this function, you
19
may add more drying steps to the program you
have selected and consequently obtain drier dishes�
Delay button
8
Once a program is selected and before the program
starts, you may adjust the delay time by pressing the
delay button� The program start can be delayed from 1-24
hours� When you press the delay button, indicator
will
16
be illuminated on the display�
Hygiene button
7
Select this button to obtain extra hygiene, this will alter
the water temperature and washing time of the program
you have selected� When you select the hygiene function,
indicator
will be illuminated on the display�
18
Rinse aid level warning display
13
In order to understand whether the rinse agent in your
machine is sufficient or not, please check the rinse agent
level warning display� If this display is illuminated, fill the
rinse agent section�
Remaining time delay display
14
The remaining time display shows the duration of the
programs and the remaining time while the program is
in operation� If you have selected a delay time, the
display will count down the delay time and then the
program time�
Use of child lock
In order to activate the child lock, press both “tablet
detergent” and “FlexZone” buttons at the same time for
3 seconds� In the meantime, you will see “CL” for 2
seconds on the Remaining time display� In order to
deactivate, press both “tablet” and “FlexZone” buttons at
the same time for 3 seconds� “CL” will flash two times�
Page 7
Hide quick links:
Advertisement
Table of Contents
