Desk Assembly
Step 1: Install the Height Adjustment Knobs onto the Right and Left Legs
A. Install a Height Adjustment Knob(11) on both the Right Leg(4) and Left
Leg(5) being sure that the locking pin goes into one of the adjustment
holes in each leg.
B. Tighten the Height Adjustment Knobs. Be sure the Legs are adjusted to the
same height when installing the Height Adjustment Knobs.
NOTE: Make sure that the
Data Cable isn't set hard
on the ground which
could damage the wire.
4
24
LOCATE BAG LABELED 1
Contents: 2 each Height Adjustmemt Knobs
5
11
Adjustment
Knob (x2)