Belt Lubrication - LifeSpan TR800-DT5 Owner's Manual

Maintenance and Tips

Belt Lubrication

Use only 100% silicone and avoid using aerosol silicone sprays which include
additives and petroleum distillates. One ounce of silicone should be used for
each application.
The walking belt comes pre-lubricated from the factory. The TR800B and
TR1200B should be lubricated every 50 hours of use. The TR5000B comes with
a maintenance free belt and doesn't require lubrication.
To lubricate, unplug your TR800B and TR1200B. Slide your hand under the
belt and lift the belt away from the deck. Apply about a dozen sprays toward
the center of the belt from each side. Rotate the belt 1/3 and repeat this
application. Rotate another 1/3 and repeat once more. Plug the treadmill in
and walk for a few minutes to disperse lube evenly.
NOTE: When lubricating the belt, make sure the treadmill is on a surface
that can be easily cleaned. After lubricating clean any excess silicone off
the walking surface of the belt and side rails.
17