8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports
4.
Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with
nylon washers through each bracket and into the rack.
5.
Tighten the screws with a No. 2 Phillips screwdriver to secure mounting brackets to the rack.
Install the Switch on a Flat Surface
The switch ships with four self-adhesive rubber footpads.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the switch.
The rubber footpads cushion the switch against shock and vibrations. They also provide ventilation
space between stacked switches.
Optional Step 5: Install an SFP Transceiver Module
The following optional procedure describes how to install an optional SFP transceiver module into the SFP+
port of the switch.
Note
Contact your NETGEAR reseller to purchase these modules. If you do not want to
install an SFP module, skip this procedure.
Installation
26