Sfp+ Port For Fiber Connectivity; Reset Button - NETGEAR MS510TX Hardware Installation Manual

8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports
When you insert a cable into the switch's RJ-45 port, the switch automatically performs the following actions:
• Senses whether the cable is a straight-through or crossover cable.
• Determines whether the link to the attached device requires a normal connection (such as when you
are connecting the port to a computer) or an uplink connection (such as when you are connecting the
port to a router, switch, or hub).
• Automatically configures the RJ-45 port to enable communications with the attached device. The Auto
Uplink technology compensates for setting uplink connections while eliminating concern about whether
to use crossover or straight-through cables when you attach devices.
For model MS510TXPP, copper ports 1 through 8 also support Power over Ethernet (PoE+).

SFP+ Port for Fiber Connectivity

To enable fiber connections on the switch, SFP+ fiber ports accommodate standard small form-factor
pluggable (SFP) gigabit interface converters (GBICs, also referred to as transceiver modules) for fiber
connectivity. GBICs are sold separately from the switch.
The switch supports the NETGEAR SFP and SFP+ transceiver modules and cables that are listed in the
following table.
Table 6. Supported SFP and SFP+ transceiver modules and cables
Speed and Medium
1G Ethernet short-reach fiber
1G Ethernet long-reach fiber
1G Ethernet copper
10G Ethernet short-reach fiber
10G Ethernet long-reach fiber
10G Ethernet
10G Ethernet
For more information about NETGEAR SFP and SFP+ transceiver modules and cables, visit
netgear.com/business/products/switches/modules-accessories.

Reset Button

The switch provides a Reset button on the front panel so that you can reboot the switch. Save the
configuration before you press the Reset button.
To reboot the switch:
1. Insert a device such as a straightened paper clip into the opening.
2. Press the recessed Reset button.
Model Description
AGM731F SFP Transceiver 1000BASE-SX
AGM732F SFP Transceiver 1000BASE-LX
AGM734 SFP Transceiver 1000BASE-T
AXM761 SFP+ Transceiver 10GBASE-SR
AXM762 SFP+ Transceiver 10GBASE-LR
AXC761 SFP+ Direct Attach Cable (DAC), 1 meter
AXC763 SFP+ Direct Attach Cable (DAC), 3 meters
Hardware Overview
16