Hardware Description; Front Panel - NETGEAR MS510TX Hardware Installation Manual

8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports

Hardware Description

This section describes the switch hardware features.

Front Panel

Model MS510TX provides four 1G ports, two 2.5G ports, two 5G ports, one 10G port, and one SFP+ port.
Model MS510TXPP is a PoE+ model that provides four 1G PoE+ ports, two 2.5G PoE+ ports, two 5G PoE+
ports, one 10G port, and one SFP+ port.
The following figure shows the front panel of model MS510TX.
Figure 1. Front panel model MS510TX
Table 1. Front panel components model MS510TX
Number Description
1 Power LED and Fan LED (see
2 Recessed Reset button (see
3 Recessed Factory Defaults button (see
4 Ports 1, 2, 3, and 4: Four independent 10/100/1000BASE-T RJ-45 ports, each with an LED that
functions as the combined link, speed, and activity LED (see
5 Ports 5 and 6: Two independent 2.5GBASE-T RJ-45 ports (also supporting 100/1000BASE-T), each
with an LED that functions as the combined link, speed, and activity LED (see
6 Port 7 and 8: Two independent 2.5G/5GBASE-T RJ-45 ports (also supporting 100/1000BASE-T),
each with an LED that functions as the combined link, speed, and activity LED (see
12).
7 Port 9: One independent 2.5G/5G/10GBASE-T RJ-45 port (also supporting 100/1000BASE-T) with a
left LED that functions as the combined link, speed, and activity LED (see
8 Port 10: One independent SFP+ port in which you can install transceiver modules (see
Fiber Connectivity
LEDs on page 12).
Reset Button on page 16).
Factory Defaults Button
on page 16).
Hardware Overview
10
on page 17).
LEDs on page 12).
LEDs on page 12).
LEDs
LEDs on page 12).
SFP+ Port for
on page