NETGEAR MS510TX Hardware Installation Manual page 13

8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports
Table 3. LEDs on the front panel of model MS510TX (Continued)
LED Description
2.5G Ports 5 and 6 LEDs Off. No link is established.
Link, speed, and activity Solid green. A valid 2.5 Gbps link is established.
Blinking green. The port is transmitting or receiving packets at 2.5 Gbps.
Solid yellow. A valid 100 Mbps or 1000 Mbps link is established.
Blinking yellow. The port is transmitting or receiving packets at 100 Mbps or
1000 Mbps.
5G Ports 7 and 8 LEDs Off. No link is established.
Link, speed, and activity Solid green. A valid 2.5 Gbps or 5 Gbps link is established.
Blinking green. The port is transmitting or receiving packets at 2.5 Gbps or 5 Gbps.
Solid yellow. A valid 100 Mbps or 1000 Mbps link is established.
Blinking yellow. The port is transmitting or receiving packets at 100 Mbps or
1000 Mbps.
10G Port 9, LED Off. No link is established.
Link, speed, and activity Solid green. A valid 10 Gbps link is established.
Blinking green. The port is transmitting or receiving packets at 10 Gbps.
Solid yellow. A valid 5 Gbps, 2.5 Gbps, 1000 Mbps, or 100 Mbps link is established.
Blinking yellow. The port is transmitting or receiving packets at 5 Gbps, 2.5 Gbps,
1000 Mbps, or 100 Mbps.
SFP+ Port 10, LEDs Off. No SFP+ module link is established on the fiber port.
Link, speed, and activity Left LED solid green. The fiber port established a valid 10 Gbps link.
Left LED blinking green. The fiber port is transmitting or receiving packets at
10 Gbps.
Right LED solid yellow. The fiber port established a valid 1 Gbps link.
Right LED blinking yellow. The fiber port is transmitting or receiving packets at
1 Gbps.
The following table describes the LEDs on the front panel of model MS510TXPP. Ports 1–8 come with a
left LED and a right LED each. Port 9 comes with a single LED. Port 10 comes with two LEDs.
Table 4. LEDs on the front panel of model MS510TXPP
LED Description
Power LED Solid green. The device is powered on.
Solid yellow. The device is booting.
Off. Power is not supplied to the device.
Fan LED Solid green. The fan is operating normally.
Solid yellow. A problem occurred with the fan.
Hardware Overview
13