NETGEAR MS510TX Hardware Installation Manual page 6

8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports
• PoE support (model MS510TXPP):
- 8 PoE+ (802.3at) ports
- Total PoE power budget of 180W for the switch
• MAC table size of 16K.
• Variable-speed fan that can lower the noise level during low temperatures.
• Acoustic noise is equal to or less than 30 dBA at 25°C.
• 78 Gbps full-duplex, nonblocking switch fabric.
• Includes 19-inch rack-mount kit for rack installation.
• Full compatibility with IEEE standards:
- IEEE 802.3 Ethernet
- IEEE 802.3u 100BASE-T
- IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
- IEEE 802.3bz NBASE-T and MGBASE-T
- IEEE 802.3an (10GBASE-T)
- IEEE 802.3ae 10-Gigabit Ethernet over fiber (10GBASE-SR, 10GBASE-LR)
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3i 10BASE-T
- IEEE 802.1Q VLAN tagging
- IEEE 802.3x Full-duplex flow control
- IEEE 802.3ad Link aggregation (LAG with LACP)
- IEEE 802.1ab LLDP
- IEEE 802.1p Class of Service (QoS)
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1x RADIUS network access control
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- IEEE 802.1af (PoE)
- IEEE 802.1at (PoE+)
• AutoSensing and autonegotiating capabilities for all ports.
• Auto Uplink™ technology is supported on all ports.
• Automatic address learning function to build the packet-forwarding information table. The table contains
up to 16K Media Access Control (MAC) addresses.
• Store-and-forward transmission to remove bad packets from the network.
Introduction
6