Step 4: Install The Switch; Install The Switch In A Rack - NETGEAR MS510TX Hardware Installation Manual

8-Port Multi-Gigabit Smart Managed Pro Switch with two 10G Ports
e. Rack-mounting screws.
f. Rack-mounting brackets.
g. Installation guide.
h. Resource CD with NETGEAR Smart Control Center Utility.
5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement.

Step 4: Install the Switch

You can install the switch in a standard 19-inch (48.26-centimeter) network equipment rack or on a flat
surface.

Install the Switch in a Rack

To install the switch in a rack, you need the 19-inch rack-mount kit supplied with the switch.
To install the switch in a rack:
1. Attach the supplied mounting brackets to the side of the switch.
2. Insert the screws provided in the product package through each bracket and into the bracket mounting
holes in the switch.
3. Tighten the screws with a No. 2 Phillips screwdriver to secure each bracket.
Installation
25