Table of Contents
Advertisement
Additional features
•
Back—to return to the previous screen.
The Allow Addresses screen displays the domains and SIP addresses in
a list. If the list is long, you can scroll down the screen until you have
reached the last entry.
The following context-sensitive soft keys are available for the Allow
Addresses page:
•
Add—to add the entry content.
•
Edit—to select the current entry and edit the entry.
•
Delete—to delete the selected domain from the list.
•
Back—to return to the Answer-Mode Settings screen.
Automatic remote firmware updates
Note: Your system administrator must enable Remote check for
update for this feature to work.
Your IP Deskphone may be configured to perform automatic firmware
updates. If this feature is configured, the IP Deskphone displays when a
firmware update is scheduled to occur, and
soft keys are displayed. If the IP Deskphone is idle and no key is pressed,
the firmware update begins in one minute.
If you press Yes, the firmware download begins.
If you are using your IP Deskphone (this includes on hold, on a
conference call, or when your IP Deskphone is ringing) and you press No,
the call is not disconnected and the firmware update does not occur. The
IP Deskphone displays the firmware download prompt again in three
minutes a total of three times.
If, after the third notification, you press
firmware update does not occur. Your IP Deskphone attempts the
firmware download process again in two hours.
Note: If you allow the update to proceed and the server is down, the
IP Deskphone does not ask for updates again.
280
Yes
and
No
context-sensitive
No
or no key is pressed, the
Advertisement
Table of Contents
