Automatic Remote Firmware Updates; Screensaver/Screen Lock - Avaya 1140E User Manual

Automatic remote firmware updates

Note: Your system administrator must enable Remote check for
update for this feature to work.
Your IP Deskphone may be configured to perform automatic firmware
updates. If this feature is configured, the IP Deskphone displays when a
firmware update is scheduled to occur, and
soft keys are displayed. If the IP Deskphone is idle and no key is pressed,
the firmware update begins in one minute.
If you press Yes, the firmware download begins.
If you are using your IP Deskphone (this includes on hold, on a
conference call, or when your IP Deskphone is ringing) and you press No,
the call is not disconnected and the firmware update does not occur. The
IP Deskphone displays the firmware download prompt again in three
minutes a total of three times.
If, after the third notification, you press
firmware update does not occur. Your IP Deskphone attempts the
firmware download process again in two hours.
Note: If you allow the update to proceed and the server is down, the
IP Deskphone does not ask for updates again.

Screensaver/screen lock

You can lock the display of the IP Deskphone using a timed Screensaver/
Lock.
When the screensaver is active, it clears the programmed keys of the
plugged-in Expansion Module. If you have logged into the IP Deskphone,
then you are not logged out, but the line key label clears and makes the
IP Deskphone inactive.
The ScrnSvr context-sensitive soft key is located on the idle screen. This
key is available only if the screensaver is enabled, and is accessed by
pressing the More...
Pressing the ScrnSvr
context-sensitive soft key until
context-sensitive soft key causes the current
Configuring custom settings
Yes and No context-sensitive
No or no key is pressed, the
ScrnSvr appears.
197