Figure 2-16 Installing Pci Option Modules - Compaq ES40CSLP Installation, User & Service Manual

Installation
7. Put on an antistatic wriststrap.
_____________________________Caution__________________________
An antistatic wriststrap must be worn when handling any module to prevent
damage to the module.
______________________________________________________________
8. Slide the option module
firmly seated (see Figure 2-16). Secure the module in place with the filler panel screw that
was removed in step 6.
After installing the option module, reverse steps 1 through 5 and reboot the system. To verify
the installation, issue the show config and show device commands from the SRM console.

Figure 2-16 Installing PCI Option Modules

2–20 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
š
into the selected slot and apply firm pressure until the module is
1
2
EA-00073