Removal and Replacement
5.3 Front Panel
Perform the following procedure to remove the front panel from the ES40CSLP rackmount
system chassis:
1. Extend the chassis for service (see Section 5.2).
2. Remove the six 10-32 flat-head screws
chassis (see Figure 5-2).
3. Pull the front panel away from the chassis.
To replace the front panel, refer to Figure 5-2 and proceed as follows:
1. Place the front panel on the front of the chassis.
2. Secure the front panel to the front of the chassis with six 10-32 flat-head screws.
Figure 5-2 Removing and Replacing the Front Panel
1
5–4 Compaq ES40CSLP Rackmount System Installation/User/Service Guide
c
that secure the front panel
2
to the front of the
EA-00080