Dnp; Dnp Form - RuggedCom RMC30 User Manual

2. Serial Protocols
A local port number on which the MicroLok protocol listens for UDP datagrams or TCP
connections.
Link Stats
Synopsis: { Disabled, Enabled }
Default: Enabled
Enables link statistics collection for this protocol.
DSCP
Synopsis: 0 to 63
Default: 0
To set the DS byte in the IP header. DS byte setting is supported in the egress direction
only.

2.3.9. DNP

Figure 2.23. DNP Form
Transport
Synopsis: { TCP, UDP }
Default: TCP
The network transport used to transport protocol data over an IP network.
IP Port
Synopsis: 1024 to 65535
Default: 20000
A local port number on which the DNP protocol listens for UDP datagrams.
Remote UDP Port
Synopsis: { IP Port, Learn }
ROS® v3.11User Guide 70 RMC30