User Privilge Level Configuartion; Tacacs+ Server Privilege Configuration; Tacacs+ Server Privilege Form - RuggedCom RMC30 User Manual

1. Administration
IP Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default:
The TACACS+ server IP Address.
Auth TCP Port
Synopsis: 1 to 65535
Default: 49
The authentication TCP Port on the TACACS+ server.
Auth Key
Synopsis: 31 character ASCII string
Default:
The authentication key shared with the TACACS+ server. It is used to encrypt any
passwords that are sent from the switch to the TACACS+ server.
Confirm Auth Key
Synopsis: 31 character ASCII string
Default: None
Confirm input of the above authentication key.

1.14.3. User Privilge Level Configuartion

The TACACS+ standard priv_lvl attribute is used to grant access to the device. By default, the
attribute uses the following ranges:
• priv_lvl=15 represents an access level of "admin"
• 1 < priv_lvl < 15 (any value from 2 to 14) represents an access level of "operator"
• priv_lvl=1 represents an access level of "guest"
You can also configure a different non-default access level for admin, operator or guest users.
If an access level is not received in the response packet from the server, access
is not be granted to the user.

1.14.4. TACACS+ Server Privilege Configuration

Figure 1.25. TACACS+ Server Privilege Form
ROS® v3.11User Guide 38 RMC30