RuggedCom RMC30 User Manual page 134

Appendix E. Command Line Listing
ping
purgemac
reset
resetport
rmon
route
sql
telnet
tftp
trace
type
version
xmodem
ROS® v3.11User Guide
Usage: ping {dest} [count] [timeout]
dest Target IP address.
count Number of echo requests to send; default is 4.
timeout Timeout in milliseconds to wait for each reply;
range is 2-5000, default is 300 milliseconds.
Purge the MAC Address Table.
Perform a 'hard' reset of the switch
Reset one or more Ethernet ports which may be useful for forcing re-
negotiation of speed and duplex or in situations where the link partner has
latched into an inappropriate state.
RESETPORT ports|'all'
'ports' - comma separated port numbers (e.g. '1,3-5,7')
'all' - all ports will be reset
Displays names of RMON alarm eligible objects
Displays gateway configuration
The SQL command provides an 'sql like' interface for manipulating
all system configuration and status parameters. Entering 'SQL HELP
command-name' displays detailed help for a specific command.
Commands, clauses, table, and column names are all case insensitive.
DEFAULT Sets all records in a table(s) to factory defaults.
DELETE Allows for records to be deleted from a table.
HELP Provides help for any SQL command or clause.
INFO Displays a variety of information about the tables in the database
INSERT Enables new records to be inserted into a table.
SAVE Saves the database to non-volatile memory storage.
SELECT Queries the database and displays selected records.
UPDATE Enables existing records in a table to be updated.
Usage: telnet dest
dest: Server's IP address.
NOTE: <Ctrl-C> closes telnet session
Usage: tftp server cmd fsource fdest
server: Remote TFTP server's IP address
cmd: put (upload) or get (download)
fsource: Source filename
dest: Destination filename
NOTE: <Ctrl-C> stops a tftp transfer.
Starts event tracing. Run "trace ?" for more help.
Displays the contents of a text file.
Enter 'dir' for a directory listing of files.
type filename
Prints software versions
xmodem direction filename
direction: send - send file to client
receive - receive file from client
filename: Enter 'dir' for list of all filenames
134 RMC30