Preemptive Raw Socket Protocol Features; Modbus Protocol Features; Dnp Protocol Features; Microlok Protocol Features - RuggedCom RMC30 User Manual

2. Serial Protocols

2.1.3. Preemptive Raw Socket protocol features

• A means to transport streams of characters from one serial port, over an IP network, to
another serial port.
• Configurable local and remote IP port numbers per serial port.
• TCP accept or request one permanent connection on configured IP address.
• TCP accept one dynamic connection from different IP address.
• Dynamic connection activity timer controlled.
• XON/XOFF flow control for permanent connection.
• 'Packetization' trigger based on a specific packet size, a specific character, or upon a timeout
for each connection.

2.1.4. Modbus protocol features

• Operation in TCPModbus Server Gateway or Client Gateway mod.e
• Multi-master mode on the server.
• Configurable behavior for sending exceptions.
• Full control over 'packetization' timers.
• A configurable Auxiliary IP port number for applications that do not support port 502.

2.1.5. DNP protocol features

• 'Packetization' per protocol specification.
• CRC checking in message headers received from the serial port.
• Local and remote source address learning.

2.1.6. Microlok protocol features

• 'Packetization' per protocol specification.

2.1.7. WIN protocol features

• 'Packetization' following the protocol requirements.
• CRC checking for messages received from the serial port.

2.1.8. TIN protocol features

• Support for two modes of TIN protocol.
• 'Packetization' following the protocol requirements.
• CRC checking for messages received from the serial port.
• Remote source address learning, specific for two different modes.

2.1.9. TelnetComPort protocol features

• RawSocket protocol with additional support for the serial break signal.
• Compliant with RFC2217.
ROS® v3.11User Guide 44 RMC30