Command Line Listing - RuggedCom RMC30 User Manual

Appendix E. Command Line Listing
Appendix E. Command Line Listing
The following commands are available at the command line of ROS®-based RuggedSwitch®
and RuggedServer™ devices:
alarms
arp
clearalarms
clearethstats
clearlogs
clrcblstats
clearstpstats
cls
dir
exit
factory
flashfiles
flashleds
help
ipconfig
loaddflts
login
logout
ROS® v3.11User Guide
Displays list of available alarms.
Usage: alarms [all]
all - display all alarm instances
(default empty) - display one instance of each alarm type.
Displays the IP to MAC address resolution table.
Clears all alarms
Clears Ethernet statistics for one or more port(s)
clearethstats ports|'all'
'ports' - comma separated port numbers (e.g. '1,3-5,7')
'all' - all ports
Clears the system and crash logs
Clears Cable Diagnostics statistics for one or more port(s).
clrcblstats ports|'all'
ports - comma separated port numbers (e.g. '1,3-5,7')
'all' - all ports
Clear all spanning tree statistics.
Clears the screen
Prints file directory listing
Terminate this command line session
Enables factory mode, which includes several factory-level commands used
for testing and troubleshooting. Only available to admin users.
Misuse of the factory commands may corrupt the operational
state of device and/or may permanently damage the ability to
recover the device without manufacturer intervention.
A set of diagnostic commands to display information about the Flash
filesystem and to defragment Flash memory.
Usage: flashfiles
Displays Flash memory statistics and Flash memory file system contents.
Usage: flashfiles info [filename]
Displays information about the specified file in the Flash filesystem.
Usage: flashfiles defrag
Defragments files in the Flash filesystem.
Flashes the unit LED indicators for the specified number of seconds.
Usage: flashleds timeout
timeout: the number of seconds to flash the unit LED indicators. To stop
flashing the LEDs, set timeout to 0 (zero).
help [command name]
[command name] - Name of command for which to get help.
If no command is specified, a list of all available commands is displayed
along with a brief description of each one.
Displays IP configuration
Load Factory Default Configuration.
Login to the shell i.e. set the access level
Logout of the shell
133 RMC30