Table of Contents
Advertisement
S u b C o m p a c t B o a r d
3.
Follow the instructions that the window shows
4.
The system will help you install the driver automatically
Step 4 – Install Audio Driver
1.
Click on the STEP4-AUDIO folder and select the folder of OS
your system is
2.
Double click on the Setup.exe located in each OS folder
3.
Follow the instructions that the window shows
4.
The system will help you install the driver automatically
Note:
1. The default output of GMA500 driver is LVDS. After done
installing the driver and see nothing if connecting the VGA, key
in "Ctrl+Alt+F1" to shift to the VGA display.
2. If you are going to install the Windows
Drive, you have to disable the SSD function before you install
the OS. If you did not disable the SSD function, some files will
be installed in SSD and after you've done installing the OS, the
system will delete the files in SSD and it will cause the failure of
SATA HDD.
Chapter 4 Driver Installation
4 -4
G E N E - U 1 5 B
®
XP in SATA Hard Disk
Advertisement
Table of Contents
