Topping Up The Coolant; Topping Up The Washer Fluid; Checking Wheels And Tyres - SMART forfour Owner's Manual

Hide thumbs Also See for forfour:
Table of Contents

Advertisement

Checking wheels and tyres

150

Topping up the coolant

G
WARNING
The cooling system is pressurised, partic-
ularly when the engine is warm. If you
open the cap, you could be scalded if hot
coolant sprays out. There is a risk of injury.
Let the engine cool down before you open
the cap. Wear gloves and eye protection.
Open the cap slowly to release the pres-
sure.
!
Only add coolant that has been premixed
with the desired antifreeze protection. You
could otherwise damage the engine.
Further information on coolants can be
found in the Mercedes-Benz Specifications
for Service Products, MB Specifications for
Service Products 310.1, e.g. on the Internet
at http://bevo.mercedes-benz.com. Or
contact a qualified specialist workshop.
If antifreeze/corrosion inhibitor is present in
the correct concentration, the boiling point
of the coolant during operation is approx-
imately 130 †.
The antifreeze/corrosion inhibitor concen-
tration in the engine cooling system should
be between 40% and 50% (antifreeze protec-
tion down to -37 †). This will protect the
engine cooling system against freezing down
to approximately -25 †.
X
Cover cap : of coolant expansion tank ;
with a cloth.
X
Turn the cap slowly one half turn. If nec-
essary, allow excess pressure to escape.
X
Turn the cap further and remove it.
X
Top up the coolant to the MAX level.
X
Replace the cap and tighten it as far as it
will go.
X
Close the service cover.
i
See "Technical data" for information on
recommended coolants.

Topping up the washer fluid

G
WARNING
Windscreen washer concentrate is highly
flammable. If it comes into contact with hot
components in the front compartment, it
may ignite. There is a risk of fire and
injury.
Make sure that windscreen washer con-
centrate is not spilled next to the filler
neck.
X
Open the service cover.
X
Pull cap : upwards at the tab.
X
If available, pull the removable nozzle up
as far as the stop.
X
Top up with washer fluid.
X
If available, push the removable nozzle
down and push it inside.
X
Replace and tightly screw on cap :.
X
Close the service cover.
i
See "Technical data" for information on
windscreen washer fluid and antifreeze.
Checking wheels and tyres
G
Warning
A flat tyre severely impairs the driving,
steering and braking characteristics of the
vehicle. There is a risk of an accident.
Do not drive with a flat tyre. Immediately
replace the flat tyre with your spare wheel,
or consult a qualified specialist workshop.
G
WARNING
Damaged tyres can cause tyre inflation
pressure loss. As a result, you could lose
control of your vehicle. There is a risk of
accident.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the forfour and is the answer not in the manual?

Questions and answers

Arthur
April 12, 2025

How can I repair the engine block of a forfour

User image 67f9e9003af7d
1 comments:
Mr. Anderson
April 12, 2025

To repair the engine block of a SMART forfour, you need to select the correct repair parts for your specific car model and engine type. Available parts include the "Valve, engine block breather" and other relevant repair kits. It is important to choose the correct model to ensure compatibility. Use a parts catalogue or search by key number (Field 2 or 2.1/2.2) to find suitable components.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF